smaller reset larger         

Main Menu

All times are in GMT +12 :: The time is now 5:22 pm.

Sub Menu

Article Data
Article Ref
1800-QIAZ-4755
Written By
Cindy Myers
Date Created
Fri, 26th Jun 2020
Updated By
Cindy Myers
Date Modified
Fri, 26th Jun 2020
 
(Lost?)

   V3 Read a Controller

Question 

How do I read a controller with FlashScan/AutoCal V3?

Answer 

FlashScan/AutoCal V3

Follow these steps to read the selected controller.

NOTE: Not all Supported controllers can be read.  Some vehicle manufacturers have disabled the ability to read the contents of a controller from the factory.  In these cases, EFILive customers will need to obtain base files from an alternative source. Some EFILive Custom Operating Systems are written to non-readable memory.  These files cannot be read from controller.  Refer to the Problems Reading a Controller knowledgebase article for further information.

Standard Menu

  1. Setup FlashScan/AutoCal for BBX features if not already setup.
  2. Connect your FlashScan/AutoCal device to your vehicle.
  3. Turn the vehicle ignition to the On or Accessory position (vehicle must not be cranked/running when reading).
  4. Navigate to the Tune Tool -> F1 Tuning -> F1 Read Tune menu option.
  5. Select correct controller type from BBX configured controllers.
  6. Click the ✔ button to initiate the read operation.
  1. While the ECM is reading a Progress bar will display for the user to visually track the read.
  2. When the read process is complete the saved file will display. Select X to close this message.
  1. The Reset Controller notification will be shown, and the controller reset process will begin. 
    1. Turn the vehicle ignition Off.
    2. Click on the Start button to begin the countdown timer.
    3. DO NOT turn the vehicle ignition on until the countdown timer expires.  This time is critical to allow the ECM to perform internal functions after a read operation.
  2.  

Pass-Thru Reading with V8 Scan and Tune

Refer to the V8 Pass-Thru Read a Controller help article.

Related Articles 

Article Title Date Created Article Views
V8 Pass Thru Read a Controller Mon, 15th Jun 2015 27798
FlashScan/AutoCal V3 Firmware & Boot Block Mon, 15th Jun 2020 85