smaller reset larger         

Main Menu

All times are in GMT +12 :: The time is now 6:32 am.

Sub Menu

Article Data
Article Ref
6659-YAHB-3781
Written By
Cindy Myers
Date Created
Fri, 19th Jun 2015
Updated By
Cindy Myers
Date Modified
Tue, 7th Jul 2020
 
(Lost?)

   Configure FlashScan and AutoCal for BBX

Question 

How do I configure my FlashScan or AutoCal to use standalone BBX features?

Answer 

There are a range of configuration files that must be installed on FlashScan and AutoCal devices before they can be used for BBX.  

Follow these instructions to configure your FlashScan or AutoCal for BBX.

  1. Connect your FlashScan or AutoCal to your PC.
  2. Open the EFILive Scan and Tune application.
  3. Select the [F5: BBX] option in the left-hand pane.

BBL (Black Box Logging) Configuration

  1. Select the [F2: Scan] option in the left-hand pane.
  2. Remove any unnecessary controller configurations to ensure capacity restrictions are not exceeded.
  3. Add your chosen controller(s) to your list;
    1. Press the green '+' icon.
    2. Right click on the Engine Controller or Transmission Controller box.
    3. Click on a selected controller.
    4. Read and accept the BBL information display.
    5. Select OK.
  4. Navigate and select Available PIDs to facilitate logging.
  5. Drag PID selections from the Available PIDs window into the Selected PIDs window.   *NOTE: For FlashScan/AutoCal V2 BBL is only supported for Cummins Controllers that have CSP5 and EDA installed.  Users MUST select the entire EDA PID Group and flash a CSP5 operating system into the ECM for effective data logging.

BBR & BBF (Black Box Reading and Flashing) Configuration

  1. Select the [F3: Tune] option in the left-hand pane.
  2. Remove any unnecessary controller configurations to ensure capacity restrictions are not exceeded.
  3. Add your chosen controller(s) to your list;
    1. Press the green '+' icon.
    2. Right click on the Engine Controller or Transmission Controller box.
    3. Click on a selected controller.
    4. Select OK.

Switchable Tunes Configuration (for DSP and CSP Custom OS's)

  1. Select the [F4: Switch] option in the left-hand pane.
  2. Enter switchable tune names as appropriate.

DTC - Trouble Code Configuration

  1. Select the [F5: DTC's] option in the left-hand pane.
  2. Select appropriate DTC options.

Quick Setup

  1. Select the [F6: Quick Setup] option in the left-hand pane.
  2. Edit FlashScan or AutoCal Device Settings as required.   NOTE: Refer to Device Settings for SD card and Wideband configurations.
  3. Select appropriate BBX Quick Setup options.
  4. Add tune files to the Quick Setup using the green '+' icon.

Write this configuration to FlashScan or AutoCal using the [Program Quick Setup] function.  The [Program Quick Setup] programs all selected Scan, Tune, Switch, and DTC options, as well as selected device settings, BBX Quick Setup selections and tune files.  Once the device is programmed, FlashScan or AutoCal is configured for BBX functions.

Each option can be programmed individually using the [Program] button on each tab, or collectively using the [Program Quick Setup] option.

Related Articles 

Article Title Date Created Article Views
V2 License & Flash a Controller Tue, 31st Jan 2012 34774
V8 Pass Thru Read a Controller Mon, 15th Jun 2015 27861
V3 License & Flash a Controller Tue, 23rd Jun 2020 40