smaller reset larger         

Main Menu

All times are in GMT +12 :: The time is now 4:21 pm.

Sub Menu

Article Data
Article Ref
9562-EUAF-6679
Written By
Cindy Myers
Date Created
Thu, 18th Feb 2016
Updated By
Cindy Myers
Date Modified
Thu, 4th Aug 2016
 
(Lost?)

   Move Tune and Log Files to/from FlashScan V2/AutoCal

Question 

How do I move Tune files from my PC to FlashScan or AutoCal?

How do I move Tune and/or Log files from my FlashScan or AutoCal to my PC?

Answer 

Move Tune files from your PC to FlashScan V2/AutoCal

There are two methods to move tune files from your PC onto FlashScan V2/AutoCal - via V8 Scan and Tune using the Quick Setup process, or via EFILive Explorer.

Quick Setup

  1. Connect your FlashScan V2 or AutoCal to your PC.
  2. Open the EFILive Scan and Tune application.
  3. Select the [F5: BBX] option in the left-hand pane.
  4. Select the [F6: Quick Setup] option in the left-hand pane.
  5. Edit FlashScan V2 or AutoCal Settings as required.   NOTE: Refer to Device Settings for SD card and Wideband configurations.
  6. Select appropriate BBX Quick Setup options.
  7. Add tune files to the Quick Setup using the green '+' icon.
  8. Write this configuration to FlashScan V2 or AutoCal using the [Program Quick Setup] function.  The [Program Quick Setup] programs all selected Scan, Tune, Switch, and DTC options, as well as selected device settings, BBX Quick Setup selections and tune files.  Once the device is programmed, FlashScan V2 or AutoCal is configured for BBX functions.
  9. BBX configuration files can be managed following the Configure FlashScan V2 and AutoCal for BBX article.

EFILive Explorer

To place tune files from your PC onto FlashScan V2/AutoCal;

  1. Connect your FlashScan V2/AutoCal device to your PC.
  2. Open EFILive Explorer.
  3. Navigate to the directory on your PC where you have saved your file
  4. Navigate to: [F3: Data Files].
  5. Select appropriate folder on your FlashScan V2/AutoCal device and drag the selected file from your PC to FlashScan V2/AutoCal.

 

Move Tune and Log files from FlashScan V2/AutoCal to your PC

To move tune files and log files from FlashScan V2/AutoCal to your PC;

  1. Connect your FlashScan V2/AutoCal device to your PC.
  2. Open EFILive Explorer.
  3. Navigate to the directory on your PC where you wish to save the file.
  4. Navigate to: [F3: Data Files].
  5. Select appropriate folder on your FlashScan V2/AutoCal device and drag the selected file to your PC.

 

Related Articles 

Article Title Date Created Article Views
Configure FlashScan V2 and AutoCal for BBX Fri, 19th Jun 2015 21667