smaller reset larger         

Main Menu

All times are in GMT +12 :: The time is now 4:20 pm.

Sub Menu

Article Data
Article Ref
6659-YAHB-3781
Written By
Cindy Myers
Date Created
Fri, 19th Jun 2015
Updated By
Cindy Myers
Date Modified
Wed, 3rd Aug 2016
 
(Lost?)

   Configure FlashScan V2 and AutoCal for BBX

Question 

How do I configure my FlashScan V2 or AutoCal to use standalone BBX features?

Answer 

There are a range of configuration files that must be installed on a FlashScan V2 or AutoCal device before it can be used for BBX.  

Follow these instructions to configure your FlashScan V2 or AutoCal for BBX.

  1. Connect your FlashScan V2 or AutoCal to your PC.
  2. Open the EFILive Scan and Tune application.
  3. Select the [F5: BBX] option in the left-hand pane.

BBL (Black Box Logging) Configuration

  1. Select the [F2: Scan] option in the left-hand pane.
  2. Remove any unnecessary controller configurations to ensure capacity restrictions are not exceeded.
  3. Add your chosen controller(s) to your list;
    1. Press the green '+' icon.
    2. Right click on the Engine Controller or Transmission Controller box.
    3. Click on a selected controller.
    4. Read and accept the BBL information display.
    5. Select OK.
  4. Navigate and select Available PIDs to facilitate logging.
  5. Drag PID selections from the Available PIDs window into the Selected PIDs window.   *NOTE: Cummins Data logging does not adhere to EFILive standard logging processes of selecting individual PID's.  Users MUST select the entire EDA PID Group and flash a CSP5 operating system into the ECM for effective data logging.

BBR & BBF (Black Box Reading and Flashing) Configuration

  1. Select the [F3: Tune] option in the left-hand pane.
  2. Remove any unnecessary controller configurations to ensure capacity restrictions are not exceeded.
  3. Add your chosen controller(s) to your list;
    1. Press the green '+' icon.
    2. Right click on the Engine Controller or Transmission Controller box.
    3. Click on a selected controller.
    4. Select OK.

Switchable Tunes Configuration (for DSP and CSP Custom OS's)

  1. Select the [F4: Switch] option in the left-hand pane.
  2. Enter switchable tune names as appropriate.

DTC - Trouble Code Configuration

  1. Select the [F5: DTC's] option in the left-hand pane.
  2. Select appropriate DTC options.

Quick Setup

  1. Select the [F6: Quick Setup] option in the left-hand pane.
  2. Edit FlashScan V2 or AutoCal Settings as required.   NOTE: Refer to Device Settings for SD card and Wideband configurations.
  3. Select appropriate BBX Quick Setup options.
  4. Add tune files to the Quick Setup using the green '+' icon.

Write this configuration to FlashScan V2 or AutoCal using the [Program Quick Setup] function.  The [Program Quick Setup] programs all selected Scan, Tune, Switch, and DTC options, as well as selected device settings, BBX Quick Setup selections and tune files.  Once the device is programmed, FlashScan V2 or AutoCal is configured for BBX functions.

Each option can be programmed individually using the [Program] button on each tab, or collectively using the [Program Quick Setup] option.

Related Articles 

Article Title Date Created Article Views
Flashing and Licensing a Controller Tue, 31st Jan 2012 31620
Reading a Controller Mon, 15th Jun 2015 24920