smaller reset larger         

Main Menu

All times are in GMT +12 :: The time is now 4:20 pm.

Sub Menu

Article Data
Article Ref
6425-AKLC-5907
Written By
Cindy Myers
Date Created
Thu, 16th Jul 2015
Updated By
Cindy Myers
Date Modified
Fri, 24th Nov 2017
 
(Lost?)

   SD Card Configuration

Question 

What type of SD cards does FlashScan support?

How do I setup my FlashScan to use an SD card?

How can I format my SD card to use with FlashScan?

Answer 

Supported SD Card Formats

FlashScan supports the following SD card formats:

  • SD (also called SDSC) V1.0
  • SD (also called SDSC) V1.01
  • SDHC V2.0

FlashScan does not support the following:

  • SDXC SD cards
  • UHS features
  • SDIO features

FlashScan supports SD cards up to 32GB.  SD Cards with a capacity of less than 64MB not supported.

Configure FlashScan to use an SD Card

There are 2 different methods to access Device Settings.  To access these;

  1. Connect your FlashScan to your PC.
  2. Open the EFILive Scan and Tune application, and then select either:
    1. Select the [F6: Devices] option in the left-hand pane; or
    2. Select the [F5: BBX] -> [F6: Quick Setup] menu and select the Edit FlashScan Settings option.

Both menu options perform the same function, however the option via the [F5: BBX] -> [F6: Quick Setup] allows these settings to be programmed in a single process along with all other BBX settings.  The option via [F6: Devices] requires separate programming to other BBX settings.

Navigate to the Device Settings option using either of the above methods;

  1. Select [F2: General] and select appropriate file system options.

  1. Navigate to [F5: Options] and select appropriate options to check SD card space and enable data protection for SD card.
  2. Select other User Configuraiton options as appropriate.  Refer to Device Settings article for further details.
  3. Program FlashScan using the Program option, or
  4. Select Close to return to the Quick Setup, select Include current device settings, and Program Quick Setup.

Format SD Card

There are 2 methods available to format an SD card for use with FlashScan.

Format via FlashScan

  1. Connect FlashScan to either your vehicle or PC.
  2. Navigate to F4 Options->F2 File System->F3 Format File Sys.
  3. Select Yes to Format the file system.

NOTE: Formatting the File System DOES NOT delete configuration data, but will delete tune and log files.

Format via PC with SD Card slot

  1. Right click on the SD Card in Windows Explorer and select Format.
  2. Manually add the folder structures to match what FlashScan expects.

 

Related Articles 

Article Title Date Created Article Views
Device Settings Fri, 19th Jun 2015 15893