smaller reset larger         

Main Menu

All times are in GMT +12 :: The time is now 10:45 am.

Sub Menu

Article Data
Article Ref
Written By
Cindy Myers
Date Created
Tue, 30th Jun 2020
Updated By
Cindy Myers
Date Modified
Wed, 1st Jul 2020

   WINUSB Drivers for FlashScan/AutoCal V3 on Windows 7


How do I install FlashScan/AutoCal V3 drivers on a Windows 7 PC?


Installing WINUSB drivers for FlashScan/AutoCal V3 on Windows 7.

  1. Start Windows Device Manager by pressing the Windows+Pause/Break hotkey combination. Alternatively, depending on whether the Control Panel is configured to display as Categories or Icons, you can navigate to the Device Manager using:
      • Categories: Start->Control Panel->Hardware and Sound -> Device Manager
      • Icons: Start -> Control Panel -> Device Manager
  1. Connect your FlashScan/AutoCal V3 device. It should appear under the “Other Devices” branch.
  1. Right-Click on the “EFILive FlashScan V3” (or “EFILive AutoCal V3”) entry and select “Update Driver Software…”.
  1. Select the “Browse my computer for driver software” option.
  1. Browse to the Drivers folder of the installed the EFILive V8 software, usually C:\Program Files (x86)\EFILive\Drivers\EFILive and select the WINUSB-Win-7 folder and click [OK].
  1. Click [Next].
  1. Click [Close].
  1. The FlashScan or AutoCal device should now be displayed under the Universal Serial Bus Devices branch and is now ready to use.